Galaxy SL I9003

How to Update Galaxy SL I9003 with Official XXLE4 Gingerbread 2.3.6 Firmware

Procedure to Update Samsung Galaxy SL I9003 with XXLE4 Firmware:

XXLE4 Extracted Files

  • Turn Off your phone so that it can be then entered in the download mode. Download mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. If the phone boots in the normal mode then you need to try again for entering the device in the download mode.

Odin for SL I9003

  • Connect your phone to the computer with the help of Original USB cable while keeping Odin opened in your computer. Once connected, you will see that the ID : COM section will turn Yellow which means that all the drivers have been installed in your computer and you are now ready to proceed to next step.

I9003 Connected

  • Click on “PDA” in Odin to select “I9003XXLE4_I9003XXLE4_I9003SERLE4_HOME.tar.md5”. Click on “Start” to start the process of firmware update. As soon as the firmware update is over, the device will be rebooted and once you see the language preferences selection or ay country preference selection, you can disconnect the device.

PDA Selected I9003

  • Now, turn Off your device and enter the phone in the recovery mode. Recovery mode can be entered by pressing up on Volume Down key + OK button, and holding both keys you need to press the Power Button. In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now option.

Note: If the Odin gives error at param.fs or say at any point then you will have to reboot your computer and try applying the process from the start. Ensure that you have installed all the latest possible drivers of your phone. Also, KIES should be the latest version.

Congratulations, you have now successfully learnt on how to upgrade your Galaxy SL I9003 with the latest Gingerbread 2.3.6 firmware which is dubbed as XXLE4. Do let us know if there is anything you need assistance on in the comments section below as we will make sure that all the issues are addressed at the earliest.

Pages: 1 2



  1. tectonic

    September 17, 2012 at 6:21 pm

    how am i going to know that my galaxy sl i9003 already been rooted???
    after i installed this XXLE4, my phone will automatically open data network…what must i do???i already untick the data network box…please help me…it happen after i unlock my phone…help…

    • Pradeep Neela

      September 17, 2012 at 8:00 pm


  2. Girish

    September 9, 2012 at 6:38 pm

    Thank u so much Pradeep Neela,this firmware is working fine on my Galaxy SL..

  3. Afif

    September 9, 2012 at 8:14 am

    I have installed firmware 2.3.6 successfully and i saw some cool new features.
    I’m experiencing problems with the MARKET/PLAY STORE: When I try to open it, I receive a message: “Sorry! The application play store (process has stopped unexpectedly. Please try again. Force close”. How to solve this problem?


    September 5, 2012 at 9:38 am

    How much time it will take ??

    • Pradeep Neela

      September 6, 2012 at 3:05 pm

      it will take around 5 – 10 minutes


    September 5, 2012 at 9:37 am

    When I am updating the android version via odin its showing fail in red. What to do now.

  6. MirulKun

    September 5, 2012 at 6:11 am

    will this upgrade suitable for my phone specs:
    baseband version : I9003DXKP7
    kernel version : root@DELL153 # 1
    build number : gingerbread.DXKP9

  7. Jawad

    September 2, 2012 at 7:04 pm

    I Have done all the instructions and my phone still on samsung logo , and booting every 30 seconds! Helpp


    August 27, 2012 at 9:58 am

    i have samsung galaxy i9003sl ,i upgrate it with kaies to 2.3.6 jpkpm version
    I use persian languge my question are;
    1- Is it last version or no?
    2- If no pls tell about last version
    3- Does Xxle4 support persian languge and keyboard
    4- thanks


      August 27, 2012 at 11:29 am

      when i9001 s plus connect samsung kies it detect the device but for upgate firmware
      :no supported device ; appear
      would you pls advices me what can we do for this error


    August 26, 2012 at 3:40 pm

    THANKS for your help
    i have i9003sl my firmware vervion is 2.3.6 and gingerbread.jpkpm and basedand version jxkp3
    and i use persion language and i upgrate it by samsung kaies last vervion my question is:
    1- is it last version or xxle4 is last one
    if xxle4 last version , does it support persian language or not?

  10. s. kuehling

    August 15, 2012 at 2:43 am

    updated via kies software, no problems…

  11. Hariharan S

    August 11, 2012 at 11:43 pm

    Thanks lot. It works good.

  12. Jesseath Marchymae

    July 1, 2012 at 8:45 pm

    Thank you so much. It works! except the wipe cache thingy, i think it takes ages before that wipe thing appears but everything is working perfectly fine now.

  13. Maverick Rox

    June 30, 2012 at 12:41 pm

    It does not support hindi fonts . any fixes my device is not rooted

  14. Maverick Rox

    June 30, 2012 at 4:00 am

    Instead of showing 3 failed/1 success my phone is updated . but 1 question Wipe data/factory reset and Wipe Cache partition will make any difference . because i forgot to do so and my data is preserved .. but data/factory reset will wipe out the data

  15. Uttam

    June 30, 2012 at 3:42 am

    Hi Pradeep .is it required to Wipe data/factory reset and also you need to select Wipe Cache partition .. Instead of displaying 3failed/1 success my phone is updated .. and my data is also preserved .. does Wipe data/factory reset and Wipe Cache partition will make any difference.???

  16. Chirag

    June 29, 2012 at 6:58 pm

    Just upgraded to this version have upgraded in the past with earlier versions as well.

    With this version, when I use Swype keybord Enlish langauge fails and goes to Russian langauge. Pls help

  17. Karan mirchandani

    June 28, 2012 at 7:00 pm

    hey the launcher is quite slow pls help me?

  18. Shashikant

    June 26, 2012 at 6:48 pm

    i updated my galaxy sl with this update and its working it has got a new lockscreen, new touchwiz 4 ui, face unlock,photo editor and now my phone is faster and smoother than before thanks alot for this update. guys dont worry just follow the right steps and u r done. all the best….

  19. Ruslin Slin

    June 26, 2012 at 3:42 pm

    is there any rooting package for this firmware?

    • Pradeep Neela

      June 27, 2012 at 2:39 pm

      we will come up with the rooting procedure v soon

  20. Edmund

    June 26, 2012 at 3:31 am

    After i successfully installed it.. it rebooted and it just keep rebooting itself!!!!!!!!!!
    What can I do about it?

    • Pradeep Neela

      June 27, 2012 at 3:25 pm

      just clear the cache from the recovery mode

  21. Karan mirchandani

    June 26, 2012 at 1:54 am

    is camera and video recording working fine?

  22. Karan mirchandani

    June 24, 2012 at 11:36 pm

    is it stable than ddkp3

  23. Karan mirchandani

    June 24, 2012 at 11:04 pm

    is the touchwiz 4 launcher stable???….

  24. may_be_not

    June 22, 2012 at 3:32 pm

    I have 2 days experience with Android, so Hello to everybody from the community!

    I bought a second hand phone Samsung Galaxy SL GT-i9003.

    It has Firmware 2.2.1., Baseband version I9003XXKB3, Kernel version root@sep-35 #1, Build number FROYO.XXKB3.
    When I type *#1234# I get the following information: PDA: I9003XXKB3, PHONE: I9003XXKB3, CSC: I9003SERKB3, Build Info: Thu Feb 24 16:12:12 KST 2011.

    I’m experiencing problems with the camera: I managed to capture 1 image, but after that when I try to use the camera I see only black screen. When I try to capture an image I receive a message: “Sorry! The application Camera (process has stopped unexpectedly. Please try again. Force close”. I also experience a great lag in homescreen menu, in web browser and in general.

    I did Factory data reset from the phone menu and after that the phone was much faster and I could take another picture with it. Then the camera stopped working again and the phone started to lag.

    After all this intro, my questions are this:
    1. It seems like the fw is very old, but is it the stock one or somebody has manually updated to KB3? In this relation, is my phone root? I installed ConnectBot and Superuser apps. In ConnectBot i see a “$”. When I type “su” I get this: “su: permission denied”.
    2. I want to update to XXLE4 2.3.6 but can I do it directly from my current fw if I follow strictly the procedure here?
    3. Do I need an sd card for this procedure?
    4. My RAM is ~350 MB in use with few app on and to 478 MB it’s not much free space, so is the new update going to make any improvement on this? Is the free RAM what makes the phone run smooth?

    Sorry for the long writing and the silly question! I’m reading a lot, but there’s so much info, so it’ll take me years to make it for this update alone. I really don’t want to brick my phone, so I’m veeery careful what I do; I’m not rushing.

    Please, try to answer my questions!

  25. Sandeep Kumar

    June 22, 2012 at 1:01 pm

    is there any rooting procedure available for this version as of now.

  26. dark joker

    June 22, 2012 at 8:58 am

    hi sir this is compatible to baseband version dxp7? tnx

    • Pradeep Neela

      June 22, 2012 at 11:50 am

      yes its compatible and you can install the same

  27. Malhar

    June 22, 2012 at 2:06 am

    Can any body elaborate the wifi issue? And any updates on GPS? I have DDKP2 installed on my device. GPS doesn;t work well. How’s the performance of this update?

    • Pradeep Neela

      June 22, 2012 at 2:37 pm

      In this update, the wi-fi issue has been resolved!!

  28. bond

    June 20, 2012 at 4:07 pm

    i am a new user of GT I9003 and have no idea how to upgrade…..please help me out in upgrading my phone, i have all my contents, contacts and other music files backup………….please help me in upgrading from basic

  29. kasta

    June 20, 2012 at 7:36 am

    works fine but still have wifi problems disconnect every few minutes, ive tried different 2.3.6 updates still wifi is my problem..

    aside from that everything works fine..

  30. Ganesh Anand

    June 18, 2012 at 9:57 pm

    Try using unofficial AOKP it is good.

  31. Shijit

    June 18, 2012 at 8:26 am

    The GUI gives an ICS feel and this update has added Face unlock too(Settings->Location and Security->Set screen lock->Face recognition). But dont know why(could be this firmware or an incompatible/mischeivous app), after each reboot henceforth, it is sending an sms(with phone IMEI details) to a fixed contact(sms is received, charged are deducted but its not logged in message list)

  32. Balkrishn Kamath

    June 18, 2012 at 8:21 am

    Will this upgrade applicable to Galaxy S GT I9003?

    • Pradeep Neela

      June 18, 2012 at 10:09 am

      yes its for I9003

      • Balkrishn Kamath

        June 18, 2012 at 9:41 pm

        That means Model GT I9003 & SL I9003 are same?

  33. Nirmal.V.J

    June 18, 2012 at 8:13 am

    i was expecting stable version of ICS for galaxy s i9003 from u developers..disappointed

    • Pradeep Neela

      June 18, 2012 at 10:09 am


  34. Abdul Majid Farooqi

    June 17, 2012 at 9:41 pm

    I have installed successfully and i saw some cool new features.
    Thank you for giving this update 🙂

  35. Ganesh Anand

    June 17, 2012 at 4:48 pm

    What are the improvements if any?

  36. Karan mirchandani

    June 17, 2012 at 1:59 pm

    Can I flash it over ddkp4 firmware

    • Pradeep Neela

      June 17, 2012 at 5:52 pm


      • Karan mirchandani

        June 17, 2012 at 10:59 pm

        Is this firmware have bugs…

Leave a Reply

Your email address will not be published. Required fields are marked *

Comment moderation is enabled. Your comment may take some time to appear.

Most Popular

To Top