Procedure to Update Galaxy S II GT I9100 with ICS 4.0.3 DXLP9 Firmware:
- Download the DXLP9 4.0.3 Firmware Package from here to your computer along with Odin. As soon as you download the same, you need to now extract the firmware package contents in your computer.
- Open the Odin in your computer and turn Off the phone so that it can be then entered in the download mode. The download mode in the device can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
- In download mode, connect your Galaxy S2 to the computer with the Original USB cable and then you will see that the ID: COM section will turn Yellow indicating that all required drivers are successfully installed.
Note: if the ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
- Install the USB Drivers in your computer &
- Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
- Now, click on “PDA” and select “” to click on Start. It will take around 5 – 6 minutes to apply the update. As soon as the firmware is applied successfully, the phone will reboot. Once you see the home screen, remove the connected USB cable and turn Off the phone.
- You now need to boot your phone in the recovery mode. Recovery mode can be entered by pressing Volume Up Key, Center button, and holding both simultaneously press the Power Button after which a recovery list will be shown indicating the recovery Mode has been entered.
- In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys.
Note: At any point of time just in case if the process of firmware update gets stopped due to any reason, all you need to do is restart the process from the start by re inserting the battery.
So there you go, you have now successfully updated the Galaxy S II with the latest DXLP9 4.0.3 ICS firmware and also cleared the cache data from your phone. Do let us know in the comments section just in case if you face any issues as we are committed to sort out the same at the earliest.
Source
