Procedure to Update HTC Sensation with Gingerbread 2.3.4:
- So, once you are done with the processes which were explained in the last few pages, you are now all set to proceed with the instructions to update your Sensation 4G. So, before you are all set to proceed, you need to download the three files which are given below in your computer which we will see in the due course of this article on how you can use the same.
- Now, once you have downloaded all these three files, all you need to do is to just move all of these three to your phone which you can transfer the same by connecting the phone to the computer with the help of the USB cable.
- You will have to ensure that you haven’t placed this file deep into the sub folders which will make it difficult to find the file. Once you place all these files in your phone, you will now have to turn Off the phone so that it can be powered ON in the recovery mode.
- The recovery mode in the HTC Sensation 4G can be entered by pressing the Volume down button and then pressing the Power button after which the recovery screen will be coming up.
- Once you enter into the recovery mode, you first need to select the option of “install zip from SD card” and then “choose zip from sdcard” after which it will show all the zip files which are present in your phone along with other files. But from the list of files, you need to select the file which is named as “P3D_Full_Wipe.zip”.
- Now, as soon as that is updated, you will have to now again boot into the recovery mode if it exists from the recovery mode and then again from the recovery mode, select the option of “install zip from SD card” and then “choose zip from sdcard”, followed by selection of the file named “CdTDroiD’s_QuikSense_v1.0.zip”.
- Now, again you need to reboot the device and then you will have to proceed to enter into the recovery mode to choose the “install zip from SD card” option and then “choose zip from sdcard” to select the file named as “QuikSense_v1.1.zip”.
- Now, after a span of around less than 10 minutes, all the above processes will be finished and then finally the device will be turned ON after which you will have to again enter into the recovery mode by turning Off the device and then pressing the Volume down button and then pressing the Power button after which the recovery screen will be shown. Here you will have to choose the options like Wipe data/factory reset and also you need to select Wipe Cache partition after which the phone needs to be turned ON and you will see that the device is now powered with the latest version of firmware which is Gingerbread 2.3.4 version.
Do let us know if just in case if you face any issues while updating the phone as we will try our level best to address and fix the issues as soon as possible. You can post all your comments in the comments section below. Please note that after you finish updating with the firmware, next up you will have to restore all the backups which you have created or made or else you will face issues with your phone like no internet access and also the other things will be wiped.
