How to Update HTC EVO 3D CDMA with Newts One S Custom ROM Firmware
Procedure to Update HTC Evo 3D CDMA with Newts One S custom Firmware:
- Download the Newts One S custom Firmware Package and patch from here to your computer and then connect your phone to the computer with the help of original USB cable. Place the downloaded zip files in your phone’s SD Card and disconnect the device from the computer to turn Off the same.
- The Boot loader mode in HTC Evo 3D CDMA can be entered by pressing Volume UP Key + OK button, and holding both simultaneously press the Power Button. If the HTC Evo 3D CDMA boots in the normal mode then you need to try again to enter into the recovery mode.
- In the boot loader mode, you need to select “recovery” so as to enter into the recovery mode. Now, in the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Newts One S custom Firmware Package which you have placed in your phone and then select the Patch file.
- Once the device is updated successfully, the phone will be landing back to the recovery mode screen. Please note that the whole process may take around 5 – 10 minutes for applying this update. After this from the recovery mode, you need to select“++++ Go Back ++++” > “reboot system now” to reboot the phone. Please note that it will take more than normal time
Note: At any point of time just in case if the process of firmware update gets stopped due to any reason, all you need to do is restart the process from the start by re inserting the battery.
Congratulations, you have now successfully applied the Newts One S custom Firmware in your HTC Evo 3D CDMA Android smartphone. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same. Do let us know if there is anything else you would like to have it on your device like any other custom ROM firmwares etc. as we will be more than happy to assist you with the same.