Procedure to Update Samsung Galaxy ACE S5830 with DDKQ8 Gingerbread 2.3.6:
- Download DDKQ8 Gingerbread 2.3.6 Firmware Package from here to your computer. Once you have downloaded, you need to extract the same to get the files mentioned below.
- Now, from extracted files, you need to Open Odin executable file and turn Off your device so as to enter the device in the Download Mode.
- The download mode can be entered by pressing down on Volume Down Key + OK button, and holding both simultaneously press the Power Button . Just in case if the device boots in the normal mode then you will have to again try the process of entering into the download mode. Please note that it’s not recommended to proceed if you are not entering into the download mode. One can also refer the below video to enter into the download mode.
- Once the device is entered in the download mode, you need to connect the device to the computer using the original USB cable and once connected you will see that the ID : COM section in Odin will turn Yellow which will mean that you are now all set to select the files mentioned below. You can select the files by clicking on the corresponding tabs in Odin. Also, all the other settings in the Odin should be the same as shown in the screen captures below.
OPS – Cooper_v1.0.ops
Select “One Package” option in the Odin
One Package – S5830DDKQ8_S5830ODDKQ7_S5830DDKQ8_HOME.tar.md5
- After selecting the files, click on “Start” to start the process of firmware update and once the firmware update is completed the device will reboot on its own. Turn Off your phone so that the device can be booted in the recovery mode.
- You can enter into the recovery mode by pressing Menu Button, and holding this you need to press the Power Button. Once you enter into the recovery mode, choose the options Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now option.
So, that’s it there you go you have now successfully updated your Samsung Galaxy Ace S5830 with the latest version of DDKQ8 Gingerbread 2.3.6 which is the stable version of the firmware. Do let us know just in case if you face any issues while you perform the update in the comments section below as we will try our level best to sort out the same.
