Procedure to Update Galaxy S Advance I9070 with Jellybean Styled Firmware:
- Download the Jellybean Styled Firmware from here to your computer. Once downloaded, connect your device to the computer and place the zip file in your phone.
- Once the file is placed, disconnect the device and download the ROM Manager app from the Google PLAY Store. You can either enter the device in the recovery mode with the help of ROM Manager app by selecting “reboot into recovery mode” or alternatively you can enter the device into the recovery mode manually.
- Recovery mode in Galaxy S GT I9000G can be entered manually by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, turn ON your device.
- In recovery mode, select “Wipe data/factory reset” & “Wipe Cache partition”. If the device starts normally, then you will need to re try the process of entering the device in the recovery mode. In recovery mode, select “install zip from sd card” to install the firmware update and select the zip file which you have placed in your device.
- Once selected, it will take around 4 -5 minutes for applying the same. As soon as the update is applied successfully, you will see the message that is “install zip from sd card completed”. Now, select “reboot system now” for rebooting the device in the normal mode. Please note that it may take longer time than expected for booting the device as it’s the first time after applying the update.
- Once the device is updated with this custom ROM firmware, you will need to follow the instructions mentioned in the below link to install all the native jellybean 4.2 firmware.
Download & Install all Jellybean 4.2 Default Apps in your Android Device – Tutorial
Note: Just in a rare case if the device doesn’t boot up or show the home screen then remove the battery and reinsert the same to boot the device again in the normal mode.
Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.
