Tutorial to Update Galaxy FIT S5670 with Value Pack Gingerbread 2.3.6 DDKT3:
- Download Gingerbread 2.3.6 DDKT3 Firmware package and Odin Package from here to your computer. Once downloaded, extract both of these files to preferably Desktop.
- Open Odin in your computer and turn off your device so that it can be entered in the Download Mode.
- The Galaxy FIT S 5670 can be entered into the download mode by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.
- Once you see the Download Mode screen in your phone, connect your device to the computer with the help of ORIGINAL USB cable and then you will see that the ID: COM section will turn Yellow which indicates the installation of all the drivers.
- In Odin click on “OPS” to select “GIO_v1.0.ops” and then at the bottom of the Odin, click on “One Package” and select “S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5” to click on “Start” for starting the process of firmware update. Once the firmware is updated successfully and once you see the home screen in your phone, you can disconnect the device from computer.
- To check on whether the firmware is updated or not, head over to the path “Settings > About Phone > Firmware Version” where the firmware version will be mentioned as Gingerbread 2.3.6 DDKT3.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
So there you go, you have now successfully applied the update of Value Pack Gingerbread 2.3.6 DDKT3 in your Galaxy GIO. Do let us know in the comments section just in case if you face any issues in the comments section.
