Procedure to Update Galaxy S Advance I9070 with Optimus Droid Android 4.1.2 Firmware:
- Download the Optimus Droid Android 4.1.2 Firmware Package from here to your computer. Once downloaded, connect your device to the computer with the help of original USB cable.
- Transfer the downloaded firmware zip file in your phone. Ensure that you are not placing the zip file in sub folders. Disconnect the device and turn Off your phone so that it can be entered in the Recovery Mode.
- Recovery Mode in Galaxy S Advance I9070 can be entered by pressing the Volume Up rocker key + Menu Button and holding these both, press the power button at the same time while the device is turned Off. Alternatively, the recovery mode can also be entered with the help of ROM Manager app which can be downloaded from the PLAY Store.
- In recovery mode, select “install zip from SD card” to select the Firmware Zip file which you have placed in your phone. It will take around 4 -5 minutes for applying the update.
- As soon as the firmware is applied successfully, you will see that the Language settings will be asked. Upon entering the settings, you can then check the firmware version in your phone from the path “Settings > About Phone” where the firmware version will be mentioned. Please be informed that it may take longer time than expected sometimes for applying the update.
Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.
So there you go, you have now successfully applied the update of Optimus Droid Jellybean 4.1.2 in your Samsung Galaxy S Advance I9070. Do let us know in the comments section just in case if you face any issues in the process of applying this update.
