Instructions to Update Samsung Galaxy Pro:
- Before proceeding to the updation procedure, you will now have to download the Update Zip file in your computer. As soon as you download the same, you will have to unzip the same on your desktop. Please note that in the process of extraction if you are prompted to enter any password then enter the password as “androidadvices.com” without the inverted comas. Please note that you should not rename the file in any manner or else the files won’t be recognized by the flashing tool which is Odin in this case. Also, additionally you will also have to download the zip file of OPS File to your computer along with the Update Zip file which is stated above. As soon as you download the zip file extract the same to your desktop as we will be suing the extracted file in the due course of this article.
- Now, when you are done with the the downloading and extracting the files successfully, you will now have to now ensure that you are turning your phone off so that the download mode which is nothing but the safe mode is activated in your phone. After turning Off the phone, you will have to first push the “Q” button to enter in to the download mode which will look like as shown in the below screen shot. If you have successfully entered into the download mode then you will see a green screen which is shown below. Also, additionally note that if the device boots in the normal mode with the home screen then you will have to again switch off the device and retry the process and if despite retrying you are unable to get into download mode then you will have to fix the download mode error for your phone. You can see the download mode screen on how it looks like.
Now, after this you will have to connect the phone to the computer where you have downloaded and extracted the zip file from the above link. Please note that while connecting the USB cable you will have to make sure that the Odin software is open as mentioned and shown above, as soon as you connect the phone to the Odin, the ID COM block will turn yellow after which you will have to enter the files by clicking on the corresponding options as shown below,
OPS – BENNETT_v1.0.ops
BOOT – APBOOT_B7510DDKC4_CL951506_REV00_user_low_true.tar,
Phone – MODEM_B7510DDKC3_CL951506_REV00.tar,
PDA – CODE_B7510DDKC4_CL951506_REV00_user_low_true.tar,
CSC – CSC_B7510ODDKC2_CL937921_REV00_user_mid_true.tar,
- Now after you feed in the files, you will have to double check the same and then you will have to proceed and click on the “Start” option to start the firmware update process. After clicking on the start, you will see that the firmware will be installed in your phone within a time of not more than 5 minutes.
- Now, you can see that the flashing process is being in process and you will have to make sure that you don’t interrupt the flashing process as this may be fatal for your phone. So, after few minutes of time you will see the Odin screen as shown below,
- Now, that’s it as soon as you see that the above screen is shown in the Odin, you will have to wait for the home screen to see in the phone and there you go, you have now successfully installed the latest firmware of 2.3.3 Gingerbread for your Galaxy Pro Android phone. Now, after this you will have reset the phone just to ensure that all the cache data is erased which can be done by following the below step.
For checking on which firmware you are currently on, you will have to go to the Settings > About Phone > Firmware Version where you will find the version of Android OS where it will show Froyo 2.2.2. So, let us know if you face any sorts of issues as we will see to it that all issues are resolved. Alternatively, you can also dial *#1234# to check the version number. Do let us know if you face any issues while updating as we will ensure that all the problems are solved.
