Procedure to update Galaxy ACE S5830i Android Phone with Gingerbread 2.3.6 Firmware:
- Download the Gingerbread 2.3.6 Android Firmware Package an Odin from here to your computer. Once downloaded, extract both the files in your computer and open Odin in your computer.
- Turn off your Galaxy ACE S5830i Android smartphone so that it can be entered in the Download Mode.
- Galaxy ACE S5830i can be entered into the Download mode by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.
- Once the device gets into the Download Mode, connect your phone to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow or Blue indicating that all the drivers are installed successfully.
- Click on “PDA” to select the firmware tar file which you got after extracting the zip file. Once selected, click on “Start” to start the process of firmware update.
- Please note that the whole process of firmware update will take around 5 – 8 minutes and once the update is applied successfully, the phone will be rebooted.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
- Alternatively, just in case if you were not able to update, then you can also check the update manually from the path “Settings>>About Phone>>Software Update”.
- Very soon we will also come with a detailed guide which will help you root the device on XXMH1 firmware and also various custom ROM firmwares which we will be checking out in coming days.
So there you go, you have now successfully applied the update of XXMH1 in your Samsung Galaxy ACE S5830i Android smartphone. Do let us know in the comments section just in case if you face any issues in the process of firmware update.
