Galaxy Mega 6.3 LTE I9205 Android smartphone can now be updated with the latest version of Jellybean 4.2.2 Android OS which is dubbed as XXUAMH2 version. So, for all those users of Galaxy mega who were facing issues related to the battery and RAM consumption can easily update the device to fix the same. So after following the list of instructions, you can proceed to check out on how you can update with this firmware update.
Quick Pre Requisites:
- All the data in your Samsung Galaxy Mega 6.3 LTE should be backed up with the help of below mentioned steps. Make sure that you are backing up the data with the help of below mentioned manual steps.
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log –Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”
- From the path “Settings > Applications > Development > USB debugging” to enable the same. Also, most importantly you will have to make sure that the minimum battery left in your Galaxy Mega 6.3 LTE is not less than 50% or else the device might just get turn Off.
Disclaimer: We should not be held responsible / liable in any manner for the damage happened to your Galaxy Mega 6.3 LTE due to not following instructions.
So assuming that you have followed all the above mentioned instructions, let’s proceed to the next step where we have mentioned the detailed instructions with which you can apply this update.
Procedure to Update Galaxy Mega 6.3 LTE with Jellybean 4.2.2 Android Firmware:
- Download XXUAMH2 Firmware Package and Odin from here to your computer. Once downloaded, you need to open odin in your computer and extract the firmware zip file in your device.
- Turn off your device so that it can be entered in the Download Mode. The Galaxy Mega 6.3 can be entered into the Download mode by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.
- Once the device is entered in the Download mode, connect the phone to the computer with the help of original USB cable.
- Once you have connected the device to computer, the required drivers will be installed which will take around 4 -5 minutes. After connecting, the ID: COM section will turn yellow indicating that all the drivers are installed successfully.
- Now, click on “PDA” to select the tar file which you will get after extracting the firmware file. The whole process of firmware update will take around 4 -5 minutes.
- From the path “Settings > More > About Device”, you will need to check on whether the firmware is updated successfully or not. Very soon we will also come out with a guide which will help you root your Galaxy Mega on XXUAMH2 Firmware of Jellybean 4.2.2 Android OS. This will help you choose from installing many custom ROM firmwares so that you can make the most of it.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to update the device with this firmware.
Do let us know in the comments section just in case if you face any issues in the process of firmware update as we will try our level best to address the same.
