Procedure to Update Galaxy Note 8.0 LTE (GT-N5120) with Jellybean 4.2.2 Android OS:
- Download the Jellybean 4.2.2 Firmware Package and Odin from here to your computer. Open Odin in your computer and turn off your device so that it can be entered in the Download Mode.
- Download Mode in Galaxy Tab 2 P3110 can be entered by first turning Off the device and then hold Volume Down Rocker Key + Menu Button and then Power ON the device. Once the device is booted and you see the Download Mode Green Robot, you can release the button combos.
- Connect your device to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow / Green, indicating that all the drivers are installed successfully.
- Click on “PDA” to select the tar file which you got from the firmware package which is the TAR File.
- Once the device is updated successfully, you now need to wait for the device to get rebooted. As soon as the device is updated successfully, you need to disconnect the device from computer.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
To check on whether the update is applied successfully or not, you need to check the same from the path “Settings > About Device” where the current firmware will be mentioned as Jellybean 4.2.2. We will very soon come up with the rooting procedure which will help you even root the device.
So there you go, you have now successfully applied the update of Jellybean 4.2.2 Android OS in your Galaxy Note 8.0 LTE (GT-N5120). Do let us know in the comments section just in case if you have any issues.
