Procedure to Update Galaxy S4 Active i9295 with Official XXUAMF5 Jellybean 4.2.2 Firmware:
- Download XXUAMF5 Rooting Package and Odin from here to your computer. Once downloaded, extract both the files to desktop and open the Odin in your computer.
- Now, turn Off your phone so that it can be entered in the Download Mode.
- Download mode in Galaxy S4 Active can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
- Assuming that the Odin is opened in your computer, connect your phone in download mode to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow or Blue as per the Odin version. Color change will indicate that all the drivers are installed successfully.
- Click on “PDA” to select the firmware file which you got after extracting the firmware package from the 1st step. Once selected, click on “Start” to start the process of firmware update. Please note that the whole process of firmware update will take around 3 -4 minutes.
- You can check the current firmware version from the path “Settings > About Phone” where you will get to see the current firmware version as XXUAMF5 Jellybean 4.2.2.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.
So there you go, do stay tuned to AndroidAdvices as we will be coming out with the custom ROM firmwares for Galaxy S4 Active i9295. Do let us know in the comments section just in case if you face any issues.
