Galaxy 551

Samsung Galaxy 551 – Steps to Update XWKPB Gingerbread 2.3.6 Firmware

Procedure to Update Samsung Galaxy i551 5510 with Gingerbread 2.3.6 firmware version:

  • Assuming that you have downloaded the 2.3.6 firmware Zip Package from the last page of Pre Requisites, you now need to unzip the same to the desktop. In the process of unzipping, you will be prompted to enter the password. Enter the password as “androidadvices.com” without inverted comas.

XWKPB Enter Password

  • Once, the file are extracted you will now have to match the files with the below screen capture. Even if single file is missing then you need to check with the extraction or download of files.

XWKPB Extracted Files

  • From the extracted files, you need to open the Odin flash tool in your computer in your computer and then you need to turn off the phone so that you can then enter into the download mode. To enter into the download mode you need to press Q + Power button simultaneously.

XWKPB Odin

  • Once you enter into the download mode, you need to now connect the phone to the computer using the USB cable which you have got at the time of purchase and then in the Odin you will see that the ID : COM section will turn yellow which will mean that all the drivers have been successfully updated and you are now ready to proceed with the next step.

XWKPB Phone Connected

  • Now, in the Odin you need to first click on the “OPS” and need to select the file which is named as “CALLISTO_v1.0.ops” and then click on “One Package” option. After this, click on the “One Package” which is there at the bottom of the Odin and then select the file which is “I5510XWKPB_I5510XXKPK_I5510DBTKP1_HOME.tar.md5”. All the files which you need to select can be selected from the extracted files.

XWKPB Files Added

  • Once you are done with all the file selections, you now need to proceed to click on the “Start” button in Odin. You need to ensure that you don’t interrupt the process of the firmware update by pulling out the USB cable or else it also might brick the device.
  • Once the firmware update is applied successfully, the device will be restarted automatically and remove the USB cable which is connected with the computer. After this, turn Off the phone so that you can then enter into the recovery mode. The recovery mode in the Galaxy I551 5501 can be entered by pressing the “T” key and continuing to holding this, you need to press the Power button to turn ON the device.

Recovery Mode

  • In the recovery mode select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now option. Refer above image for more details on the same. Please note that the above image is just for the representational purpose and may differ from the actual image.

So, in this way you have easily applied the firmware update of the latest Gingerbread 2.3.6 for your Samsung Galaxy i551 5510 Android phone. Do let us know in the comments section just in case if you face any issues while updating the device with this version of firmware. Just in a rare case if the firmware didn’t get updated then you need to follow the whole process again so as to update the device again.

Pages: 1 2 3

232 Comments

232 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Comment moderation is enabled. Your comment may take some time to appear.

To Top