Procedure to Update Docomo SC 02B with New Firmware:
- Download the latest Version of Value Pack OLC4 Firmware Package from here to your computer and once its downloaded, you now will have to extract the same so as to get the files which are shown in the below screen capture.
- After this, turn Off your phone and open the Odin in the computer so that you can then enter your phone in the download mode.
- Download mode can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered.
- Connect your Phone to the computer with the Original USB cable and then you will see that the ID: COM section will turn Yellow which will mean that all the drivers have been successfully updated.
Note: if the ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
- Install the USB Drivers in your computer &
- Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
- Click on “PDA” to select “SC02BOMLC4_SC02BDCMLC4_SC02BOMLC4_HOME.tar.md5” and once it’s done, click on “Start” to start the process of firmware update. As soon as the update is applied successfully, the phone will then be rebooted. Once you see the home screen, remove the connected USB cable and turn off the device so that the same can be entered in the recovery mode.
- Recovery mode can be entered by pressing Volume Up Key, Center button, and holding both simultaneously press the Power Button after which a recovery mode list will be shown indicating the recovery Mode has been entered.
- In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys. Once it’s done, you then will have to select the option of “reboot system now” for restarting the device.
Note: At any point of time just in case if the process of firmware update gets stopped due to any reason, all you need to do is restart the process from the start by re inserting the battery.
So congratulations, you have now successfully applied the update in your Docomo powered Samsung Galaxy SC 02B. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.
