Procedure to Update Galaxy Ace Plus S7500 with Gingerbread 2.3.6:
- Download the latest DDLD1 Firmware package along with Odin from here to your computer. Once you have downloaded, you now need to unzip the firmware and odin in your computer.
- Download mode in Samsung Galaxy ACE PLUS S7500 can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which a green robot will be shown indicating the Download Mode has been entered. After this, you need to press the Volume Up button as shown below to confirm the download mode.
- As soon as the device gets into the download mode, connect the same to your computer with the original USB Cable while keeping the Odin opened in your computer after which you will see that the ID : COM section will turn Yellow.
Note: if the ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
- Install the USB Drivers in your computer &
- Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
- Now, click on “PDA” to select the file “S7500DDLD1_S7500ODDLD2_S7500DDLD1_HOME.tar.md5” and then click on “Start” in Odin to start the process of firmware update.
- It will take around 5 – 6 minutes for completing the process of firmware update. As soon as you see the home screen in your phone, disconnect the phone connected from the computer and turn off the device so as to enter the device in the recovery mode.
- To enter into the recovery mode, press Volume Up Key + OK button, and holding both simultaneously press the Power Button. You can also refer to the below shown video. Just in case if the device starts normally, then you will have to again retry entering the recovery mode.
Note: At any point of time just in case if the process of firmware update gets stopped due to any reason, all you need to do is restart the process from the start by re inserting the battery.
That’s it congratulations, you have now successfully applied the DDLD1 Gingerbread 2.3.6 firmware in your Samsung Galaxy Ace Plus S7500. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.
