Procedure to Update Galaxy Note N7000 with Official DDLP8 4.0.3 firmware:
- Download the DDLP8 4.0.3 Firmware Package & Odin from here to your computer. Once downloaded, extract the same and then open Odin in your computer.
- Turn Off your device so that it can be entered in the Download Mode. Download mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Up key to continue entering the Download Mode.
- Connect your Galaxy Note to computer with the help of original USB cable while keeping the Odin application opened in your PC. Once the device is connected, you should see that the ID : COM section in your Odin turns Yellow which will indicate that all the drivers have been installed successfully.
Note: If the ID : COM section doesn’t turn Yellow, you need to check with two things which are mentioned below,
• Install the USB Drivers in your computer &
• Go to the Path “Settings > Wireless & Network > USB Settings” and ensure that “Samsung KIES” option is ticked before connecting the phone to the computer.
- Up next click on “PDA” tab to select “N7000DDLP8_N7000ODDLP5_N7000DDLP4_HOME.tar.md5” and click on “Start” to start the process of firmware update. As soon as the device is updated successfully, the Galaxy Note will be rebooted, now disconnect the device from computer and turn Off the device so that it can be then entered in the recovery mode.
- Recovery mode in Galaxy Note can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Down key to continue entering the Recovery Mode.
- In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys.
Note: At any point of time just in case if the process of firmware update gets stopped due to any reason, all you need to do is restart the process from the start by re inserting the battery.
Congratulations, you have now successfully updated the Galaxy Note N7000 firmware with the latest DDLP8 version of ICS 4.0.3 Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.
