Procedure to Update Galaxy S2 GT I9100 with the latest ICS Bezke Ultra ICS Firmware:
- First up you need to Download the Bezke Ultra ICS Package from here to your computer. After this, copy this zip file into your phone by connecting the phone to the computer with the help of original USB cable.
- Ensure that you are not placing the file deep into the sub folders. Remove the connected USB cable and turn off the phone so that it can be then be entered in the recovery mode.
- The recovery mode can be entered by “Pressing Volume Up key+ Menu Key + Power ON the device”. Once you enter into the recovery mode, you need to select “Wipe data/factory reset” & “Wipe Cache partition” so that this will clear the cache which is there in your device.
- In the recovery mode, you need to select “install zip from sd card” > “choose zip from sd card” and then choose the Bezke Ultra ICS Custom ROM Firmware Zip file which is placed in the phone.
- Once the update is applied successfully, then the device may get restarted automatically or it will land the device in the recovery mode. If the device lands up in the recovery mode, you need to select “ ++++ Go Back ++++” and select “reboot system now” for restarting the phone.
Tip: Due to some reasons if the update process gets failed or interrupted, then you need to apply the update again by following the steps again from the start. Don’t forget to restore the backup which you have taken in the initial steps.
Note: if the device enters in the Boot loop mode then you will have to again re follow the above mentioned steps so as to apply the update again.
So congratulations, you have now successfully applied the update of ICS Android 4.0 firmware Bezke Ultra ICS. Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.
