Procedure to Update Galaxy S3 GT I9300 with Omega v6.0 Firmware:
- Download Omega v6.0 Custom ROM Firmware Package from here to your computer. Once downloaded, you need to connect your device with the computer and then place the zip file in your device. Once you copy the same, disconnect the device and turn Off the same.
- Now, you need to enter your device in the recovery mode. The recovery mode can be entered by pressing the Volume Up Key, Center button, and holding both simultaneously press the Power Button. If the device boots up in the normal mode, then try again the above process to get your Galaxy S III in recovery mode.
- In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys so that all the cache data will be wiped Off completely.
- Select “install zip from sd card” > “choose zip from sd card” and then choose the Omega 6.0 Custom ROM firmware package and then select “Yes” with the help of Volume rocker keys and Menu button. It will take around 5 – 6 minutes for applying this firmware update, once it’s done you now need to select “Go Back” and select “reboot system now” to reboot the phone in the normal mode.
Note: Just in a rare case if the device is not updated and it gets into the boot loop mode, you need to again clear the cache from the recovery mode and retry the whole process from the start.
So there you go, you have now successfully upgraded your device with the latest firmware of Omega 6.0 firmware version. Do share with us in the comments section just in case if you face any issues as we will try our level best to sort out the same.
