Galaxy S 4G

How To Update Samsung Galaxy S 4G to Stable Froyo UVKD1 2.2 Firmware

Now, after this as soon as you will have to connect the phone to the computer where you have downloaded and extracted the zip file from the above link. Please note that while connecting the USB cable you will have to make sure that the Odin software is open as mentioned and shown above, as soon as you connect the phone to the Odin, the ID COM block will turn yellow after which you will have to enter the files by clicking on the corresponding options as shown below,Enter PDA

PDA – T959VUVKD1-REV00-home-low-980580.tar.md5

Note : Ensure that the Re Partition option is not checked and you double check all the files before proceeding.

  • Now after you feed in the files, you will have to double check the same and then you will have to proceed and click on the “Start” option to start the firmware update process. After clicking on the start, you will see that the firmware will be installed in your phone within a time of not more than 5 minutes. After this, you can see that the flashing process is being in process and you will have to make sure that you don’t interrupt the flashing process as this may be fatal for your phone. So, after few minutes of time you will see the Odin screen as shown below,

Flashed Successfully

  • Now, after some time you will see that the firmware updation process will come to an end and then you will see that the Odin will be showing the PASS message in the green colour which will mean that the firmware has been successfully updated. Now, after this you will have reset the phone just to ensure that all the cache data is erased which can be done by following the below step.

There you go, you have now successfully updated your Samsung Galaxy S 4G Phone with the Froyo 2.2 version. To check the same you need to go to the path from your phone Settings > About Phone > Firmware Version where you will find the version of Android OS where it will show Froyo 2.2. So, let us know if you face any sorts of issues as we will see to it that all issues are resolved. Alternatively, you can also dial *#1234# to check the version number. Do let us know if you face any issues while updating as we will ensure that all the problems are solved.

Pages: 1 2 3 4

13 Comments

13 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Comment moderation is enabled. Your comment may take some time to appear.

To Top