Procedure to Update Galaxy FIT S5670 with Gingerbread 2.3.6 Firmware:
- Download Gingerbread 2.3.6 Package in your computer after which you need to extract the same. In the process of extraction, you will be prompted to enter the password. Enter the password as “androidadvices.com”.
- Match the extracted files from the below shown screen capture, even if single file is missing then you need to check with the extraction or download process.
- From extracted files, open Odin executable file and turn Off the phone so as to enter the device in the download mode.
- Now, you need to enter the by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Just in case if the device boots in the normal mode then you will have to again try the process of entering into the download mode.
- After entering the phone in the download mode, connect the device to the computer while keeping the Odin opened. Within a minute, the ID : COM section will turn yellow which will mean that all the drivers have been successfully installed and you are now ready to proceed to the next step.
- Click on the “OPS” option in the Odin to select the below mentioned file, tick on “One Package” option and then select the One Package option as mentioned below.
OPS – BENI_v1.0.ops
One Package – S5670DDKT1_S5670ODDKT1_S5670DDKT1_HOME.tar.md5
- Click on Start and then wait for the device to get restarted. Once the device gets restarted, you will be asked to enter the Google Account credentials. Once you see the home screen in your phone, disconnect the connected phone and turn Off the phone so as to enter the phone in the recovery mode.
- The recovery mode can be entered by holding the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.
- Once you finish the above process, you now need to proceed to select “++++ Go Back ++++” and select the option of “Reboot System Now” for restarting the device.
Note: Just in case if you face any issues in the process of firmware update or if the process gets interrupted, you will then have to reapply the whole process of firmware update. Also, don’t forget to restore back the data which you have backed up so that you can easily use all the services like before your phone was in.
- The updated firmware can be checked from the path of Settings > About Phone > Firmware Version where you will find the version of Android OS where it will show DDKT1 2.3.6. Also, if you are unable to access the internet after the firmware update then you will have to re configure the APN Settings which can be done from the path Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names.
So, in this way you have successfully updated your Samsung Galaxy FIT S5670 with the latest version of Gingerbread 2.3.6 firmware. Do let us know just in case if you face any issues in the process of updating as we will try our level best to sort out the same.
