- So, up next you are ready for initiating the firmware updation process. Now, all you need to do is to just click on the PDA option in the Odin and then you will have to select the file which you have extracted after downloading the firmware which is named as,
PDA – I9100XXKG5_I9100OXAKG5_I9100XXKG5.tar
- After selecting the file, ensure that you haven’t added the PIT file and also don’t tick on the Re-Partition field as this will spoil the phone and may also brick the phone in some cases. So, now as soon as you enter in the fields with the above mentioned files, you will have to click on the Start option to proceed for the updation process after which the device upgradation process starts as shown below,
- Now, as soon as the update is applied into the phone, the phone will process the update at the final stage which will be shown just like the below mentioned screen as in the message box you will see the message as “PASS” which shows that the firmware update was successful.
- There you go, as soon as the updation of the Samsung Galaxy S2 is finished you will see that the device will be rebooting, as soon as the device is rebooted you will have to simply pull of the USB cable after you see the home screen on your phone. Since there is a cache memory of the previous firmware gets stored in the device, you will have to clear the same and which can be done by performing the full reset by dialing the short code *2767*3855# and then you will see that all the cache is cleared successfully. To check that version has been successfully updated or not you will have to type in the code as “*#1234#”.
- Now you will have to go in the recovery mode wherein you will have to delete the cache memory so that all unwanted files are removed if there are any left in the phone.
- For this you will have to first turn off your device, long press the volume up key, press Menu as holding both the buttons press the power button to start. You can see that after device gets switched ON, you will find options like clear cache data. You can clear that by selecting options Wipe data/factory reset and also you need to select Wipe Cache partition after which you need to reboot your device by selecting reboot system now after which your Galaxy S2 will be rebooting and again you will have to set up your Google accounts etc. Doing this will not only optimize the battery but will also remove all the data flux from your phone.
Do, let us know if you face any of the problems as we will ensure that all problems are solved. Just in case if you have encountered with any issue or say if the firmware is interrupted in between then no need to panic as all you need to do is to just follow the upgrade instructions from the start so that the firmware is installed successfully.
