Procedure to Update Galaxy Note N7000 with ZSLPF 4.0.3 ICS Firmware:
- Download the ICS 4.0.3 Firmware Zip Package from here to your computer. Once downloaded, extract the same to get the below mentioned files. Even if single file is missing, you need to extract and download the same again.
Q1_20110914_16GB.pit
Q1_20110914_32GB.pit
GT-N7000-MULTI-CSC-OZSLPF.tar.md5
MODEM_N7000XXLR1_REV_05_CL1144476.tar.md5
N7000_APBOOT_N7000ZSLPF_CL558430_REV02_user_low_ship.tar.md5
N7000_CODE_N7000ZSLPF_CL558430_REV02_user_low_ship .tar.md5
- Now, download Odin3 v1.83 in your computer and open the same. Turn Off your Galaxy Note so that it can then be entered in the recovery mode.
- Turn Off your device so that it can be entered in the Download Mode. Download mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Up key to continue entering the Download Mode.
- Connect your NOTE N7000 to the computer and once connected, you will see that the ID : COM section will turn yellow which will indicate that all the drivers have installed successfully and you are ready to proceed to the next step.
- Click on the below mentioned respective tabs and select the corresponding file from the extracted zip file.
BOOTLOADER – N7000_APBOOT_N7000ZSLPF_CL558430_REV02_user_low_ship.tar.md5,
PDA – N7000_CODE_N7000ZSLPF_CL558430_REV02_user_low_ship .tar.md5,
CSC – GT-N7000-MULTI-CSC-OZSLPF.tar.md5,
Phone – MODEM_N7000XXLR1_REV_05_CL1144476.tar.md5,
PIT – Q1_20110914_16GB.pit (If your phone is of 16GB) or Q1_20110914_32GB.pit (If your phone is of 32GB)
- Once all the files are selected, click on “Start” to start the process of firmware update. Once the update is applied successfully, the phone will be restarted. Once you see the home screen, disconnect the phone from the computer. Turn Off your phone so that it can be entered in the recovery mode.
- Recovery mode can be entered by pressing Volume Down Key + OK button, and holding both simultaneously press the Power Button. Now, a Warning message will be shown when you need to press the Volume Down key to continue entering the Recovery Mode.
- In recovery mode, select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system now with the help of Volume rocker keys.
Tip: Just in case if the device doesn’t get booted up, you need to now re insert the battery and then try following the procedure from the start. Also, don’t forget to restore the backed up data.
Do let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same. Congratulations, you have now successfully applied the update of ICS ZSLPF 4.0.3 firmware.
