Procedures to apply XXJH7 update to Samsung Galaxy Spica i5700:
- So, considering that you have followed all the instructions which are mentioned above you will now have to proceed to downloading of the Galaxy Spica XXJH7 Update Zip Package which contains all the necessary files which you will be requiring at the time of the update.
- In the process of the unzipping, you will be prompted to enter the password. Enter the password as “androidadvices.com”. As soon as you unzip the same, you will find the files as shown in the below screen shot. Match the files which you have got after unzipping from the below screen shot, just in case even if single file is missing you will now have to again download the zip file again.
- Now, upon successful extraction, you will now have to turn Off the phone so that you can now put your phone in the download mode. The download mode in the Galaxy Spica i5700 can be entered by pressing the volume down + camera + power key. If you are unable to get into the download mode for the first time then you need to try till you get into the download mode as without download mode you cannot proceed to further steps.
- Please note that once you get into the download mode you will now have to open the Odin in your computer and after that you need to connect your phone to the computer while the Odin opened in your computer with the help of the USB cable which you have got with the phone at the time of purchase.
- Now, after this you will see that the it will take some time to load all the drivers and then the ID : COM section in the odin will show the COM PORT ID which will mean that all the drivers have been successfully loaded and you are now ready to choose the files in the Odin.
- Now, in Odin you will have select the below mentioned corresponding tabs and select the corresponding files which are mentioned after which you need to double check the same.
OPS – spica_jc3.ops,
BOOT – I570EXXJF1_CL324368_Bootloader
Phone – I570EXXJD1_Phone
PDA – I570EXXJH7_CL404014_PDA
CSC – I570EXENJH3-CSC-CL445391-XEN
- Once you double check with the same, you need to click on the “Start” option in the Odin after which the firmware updation process will be started.
Note: Ensure that the “Re – Partition” option is not checked and is un ticked. ALSO, DON’T EDIT OR SELECT ANY OTHER SETTINGS IN ODIN.
- During the firmware update you will need to just ensure that you are not interrupting the process of firmware update, just in case if it gets interrupted due to unavoidable situations then you need to remove the battery, re insert it and then you need to again follow the instructions from the start.
- Now, once the firmware update is successful you will see that the device will be restarting and after that you will be prompted to enter the Language preferences followed by the Google Account settings after which you will be seeing the home screen in your phone which will mean that the firmware update has been successfully updated on your Galaxy Spica i5700.
- Please note that just in case due to some interruption in the firmware update if the update is unsuccessful then you will have to remove the battery, reinsert the same and then you need to follow the instructions again from the start so as to apply the update once again.
- Now, upon successful completion of the firmware update you will now have to enter into the recovery mode. The download mode in the Galaxy Spica i5700 can be entered by pressing the volume Up + camera + power key. If you are unable to get into the recovery mode for the first time then you need to try till you get into the recovery mode as without download mode you cannot proceed to further steps.
So, that’s it in this way you have easily updated the firmware of the Samsung Galaxy Spica i5700 to the latest version of enhanced version of Eclair 2.1. If at any point of time if you face any issues while updating the firmware you will can report the same to us in the comments section below and we will try our level best to solve the same as soon as possible.
